Isocheck ResiScreed 6, 8 or 10 under screed impact improvement system, supplied by Isomass Ltd. Unit 14 Papworth Business Park, Stirling Way, Papworth Everard, Cambridgeshire CB23 3GY and installed in accordance with manufacturer’s instructions / recommendations.
The floor surface should be swept free of any loose debris that may damage or bridge the system.
Butt joint and seal all roll edges of isocheck ResiScreed 6, 8 or 10. At perimeters overlap ResiScreed 6, 8 or 10 onto a right angle flanking edge strip which should be turned up all vertical surfaces to allow a minimum 50mm to protrude above the intended FFL of the screed.
Perimeter overlaps or butt joints should be sealed with a min 100mm wide Isocheck jointing tape.
Services that penetrate the screed should be isolated by wrapping with ResiScreed 6, 8 or 10 which again would be taped.
When trafficking the floor take care not to perform any unnecessary actions that may cause any of the taped joints to be forced apart.