The monodeck Mat 15
This system is designed to reduce airborne & impact sound transmission through timber floors.
Monodeck Mat 15 is a 15mm thick tri-layer system with a reconstituted 8mm ACF foam core which will provide impact and airborne improvement.
Monodeck Mat 15 is ideal for floor upgrades when looking to improve sound reduction on stairs and under engineered timber floors.
Monodeck 20T
This system is designed to reduce transmission through timber floors in situations where finished floor height is critical.
Monodeck 20T boards consist of a layer of 8mm reconstituted ACF (Acoustic Chip Foam) bonded to 12mm p5 moisture resistant chipboard.
When installed as part of a complete sound reduction system, it enables a timber floor to meet the sound transmission regulations of Approved Document E 2003 and subsequent amendments in 2004, 2010, 2013 & 2015.
Isocheck 28T, 24T, 18T & 15T
High-performance acoustic floor systems designed to reduce impact sound transmission through traditional timber floors where no additional precautions are required for higher domestic loads in bathrooms and kitchens.
Isocheck 28T, 24T and 18T consist of a 6mm layer of Isofiba bonded to 22mm, 18mm or 12mm P5 V313 moisture resistant chipboard, whereas Isocheck 15T consists of a 6mm layer of Isofiba bonded to 9mm moisture resistant medium density fibreboard.
When installed as part of an Isomass approved separating floor construction either system enables a traditional timber joisted floor to meet the sound transmission standards of Approved Document E 2003 and subsequent amendments in 2004, 2010, 2013 and 2015.
Isocheck Perimeter Flanking Band
Isocheck flanking bands act as anti-noise gaskets between floating floor systems and structural elements.
In this way, expansion is also catered for without the need for an air gap, where noise leakage may otherwise occur.
