Curecote Super

Application Instructions:

• Curecote Super should be sprayed onto the concrete surface as soon as free from surface water, at a rate of 5-6m2 per litre. 
• Application to power floated concrete floors should be carried out after power floating is complete. 
• Concrete struck from formwork should be dampened down with clean water prior to the application of Curecote Super. 
• When applied to freshly cast concrete Curecote Super acts as a curing membrane which prevents the loss of water from the concrete surface thus assisting in the efficient hydration of the cement particles. 
• The application of Curecote Super to fresh concrete will seal and harden the concrete surface whilst acting as an anti-carbonation coating and efflorescence suppressor. Curecote Super is UV re- sistant and does not degrade. It remains as a permanent coating on the concrete surface. 
• Epoxy, polyurethane, acrylics, vinyls, bitumens and alkyds are gen- erally suitable to overcoat Curecote Super treated surfaces. It is recommended that a test area is applied to ensure compatibility of specific systems