ReferenceSWLLifting EyeFGELRS
PP0250752.5T2.5T301094754010
PP0501255T5T40151051255610

The flat foot anchor is particularly suitable for thin elements. It is used with the additional reinforcement shown in the table below. The anchor’s foot and its complementary reinforcing steel must be located under the upper reinforcement layer and ligated to the lower one. In use, the strength of the concrete must be at least 25 MPa. For lower concrete strength, the SWL must be reduced by 20%. However, a minimum resistance of 15MPa is required.

The following table gives the diameter and total length of the necessary complementary reinforcement:

ReferenceSWLAdditional Reinforcement
PP0250752.5T4 HA Ø8 long 300mm
PP0501255T4 HA Ø12 long 500mm

Reinforced ribbed steel B500B

Flat Foot Anchor Technical Information
Flat Foot Anchor Technical Datasheet