Push-Pull props

• Inner/outer tube: steel grade S235JRh, following UNI EN 10219-1/2; inner tube Ø48,3 mm (1 1/2”), outer tube Ø57/60,3 mm (13/4”)/(2”);
• Adjustment: sleeve or self-cleaned external thread;
• Unlousable pin rounded ending;
• Max extension: 2600 mm – 5100 mm (8’6″-16’8″).

Push-Pull props Features:

• Swivelled bases with rounded shape: Safer to move and easier to mount due to the oval hole. Foto-TP-B
• Hand safety system: When the prop is closed there is a minimum of 10 cm of free length of the internal tube to avoid the involuntary crushing of the operator’s hand.
• Holes punched: Warranty the absence of processing burrs, ensuring perfect functionality even after many uses.
• External Thread: It is made by process rolling, so there is no removal of material. It is distinguished for the abundant length, increasing in this way the field of fine regulation and for the two self-cleaning steel nuts.

• Internal (or covered) thread: Obtained by rolling without the removal of material, and later welded to the outer tube, obtaining in this way higher strength and functionality.
• Steel Sleeve: The small tube at the top allows the Push-Pull effect and at the same time protects the internal thread, while the deformation of the bottom prevents the accidental disengagement from the thread.

Push Pull 1-36

Push pull 1-51